Controller for electric duct heaters R6.1

Short description

R6.1 is a proportional controller for electric heaters with automatic voltage adaptation. An internal or an external sensor is used with the device.


Get custom request

Attributes

Country of Manufacture Poland
Max. controlled power 3.2 kW
Max. adjustable current 16 A
Voltage 1 x 230 V
Frequency 50-60 Hz
Number of phases 1
Dimensions (W x H x L) 150 x 80 x 45 mm
IP class IP20
Ambient temperature without condensation 0-30 °C
Humidity 90%RH max.

Description

R6.1 is a proportional controller for electric heaters with automatic voltage adaptation. An internal or an external sensor is used with the device. Regulates heat with turning load On of Off. Ratio between On-time and Off-time is varied 0-100% to suit the prevailing heat demand. Controller is designed only for electric heating control, control principle makes it unsuitable for motor or lighting control. R6.1 is not suitable for the control of three-phase electrical current, it is used to control monophasic heaters only. Night function - setpoint reducing 0-10°C, then timer is connected and its contacts close. Supply air temperatures can be limited (MIN, MAX), then 2 sensors wiring diagram is used.